Watering Bag for Trees and Shrubs
Treegator is a slow release watering system for newly planted trees. Treegator Jr. PRO slowly and evenly delivers a high volume of water (up to 14 gallons) directly to the root system of a newly planted tree or shrub with no run-off or evaporation. Experts agree - deep watering is the best way to reduce the effects of transplant and drought shock in new plantings. The problem is, that watering by hand with a hose or sprinkler - even on a frequent basis - is insufficient. That's because most of the water applied is lost due to run-off or evaporation, thus not allowing for the water to penetrate deep enough into the soil to properly saturate the root zone. Treegator is designed to properly water a newly planted tree or shrub by slowly and evenly providing deep water saturation directly to the root zone, with no run-off or evaporation - Every time. With Treegator, there's no guesswork. You'll water your trees and shrubs more efficiently and effectively than conventional watering methods and spend significantly less time and effort doing it. Treegator Jr. PRO is ideal for watering trees or shrubs up to 6-inch in caliper (trunk dia.) with branches beginning at least 6-inch from the ground or higher. When Treegator Jr. PRO is used with mulch, its shape and color make it almost invisible. Installation is easy and requires no tools. Just place Treegator Jr. PRO on level ground around the trunk of a new tree or shrub, fill it with water, and walk away. Unlike other watering systems, when you use a Treegator Bag, there are no trenches or holes to dig, and no stakes or spikes to drive into the ground. Treegator saves time, water and money. A 14 Gallon Treegator Jr. PRO continuously waters a newly planted tree or shrub for approximately 5 to 8 hours. For most new plantings, a 15-Gallon Treegator Jr. PRO needs to be filled only 1 to 2 times per week (adjust your watering schedule as needed).